Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello,I have a network consisting of several CBW240AC access points and would like to assign my clients to the appropriate VLANs using RADIUS.The RADIUS is configured and appears to be working.The access point attempts to assign the client to the cor...
Hi,today I found a very strange behaviour in my log files on my Cisco Router ISR 1111-8P.I executed the command "sh history all" and the output was surprising!CMD: 'show platform' 15:42:00 CEST Tue Sep 3 2024CMD: 'show version' 15:42:00 CEST Tue Sep ...
Hi, I have 2 CBW240AC in my network. Authentication is done via external radius server. 802.11r is enabled. Network is on 2,4 and 5 GHz.Sometimes Android clients are not able to connect to the network and I get this message in syslog:Apr 3 11:11:24 ...
Hello, so far I use the CISCO switches CBS250-8T-E-2G in my network and would like to add another switch.Here I came across the model CBS250-8T-D.From the datasheet I can see these differences:- CBS250-8T-D has a smaller power consumption- CBS250-8T-...
Hi there,
about 6 month ago I bought a Cisco C1111-8P ISR router with IOS XE Version 16.12.04.It is working as an edge router for DSL dialup. So no really special configuration. (Ok, source based routing for direct IPv6 and tunneled HE-Uplink; both s...
Not initially.However, before my first post in this thread, I created and disabled an RLAN with VLAN 32 so that the VLAN would be recognized.So yes, it is displayed:
Just a short update:The command executions returned after a few days.So I think it has nothing to do with the web or SNMP server.I did some further investigation and I think it is the call-home service mentioned by @Leo Laohoo .When I run the "call-h...
Sorry for the late reply, but I wanted to wait and see if the problem continues to persist after my small configuration changes.First I removed the SNMP community name “public”, because I found CVE-2017-6742 and thought that could be related to the a...
No DNAC or Cisco Prime here.But I have Observum running which accesses the router via SNMP.I will disable this as a test. And I will remove the default SNMP community "public". I just saw that it is still in the config.
