Hello,I would like to integrante CCM8.6 with b-acd installed in a H323 gateway. The scenario is as following:PRI----GW(b-acd)----CCM8.6----Operator phonesI have configured the gateway also as a CCME (with telephony-service command), and b-acd is work...
Hello, I have just installed a CUCM cluster version 8.6, and I don't find out the spanish locale file to download from cisco.com. The latest version is 8.5, but when I try to install it I receive an error: "Major and minor version numbers obtained fr...
Hello, we have a DMVPN scenario with a central office with a 2821 (gi0/0 to the Internet an gi0/1 to the firewall, which is connected to the LAN with another ethernet port), and 6 remote offices with 877, 2801, 2811 or 2821 using EIGRP. I would like ...
Hello, we have a DMVPN network and it is working well, but we are not able to route the traffic between two spokes directly (without going to the hub). When we generate traffic between tho spokes we can see the NHRP table as following:spoke3#sh ip nh...
Hello, I am trying to use SOAP to modify call forward all in a DN. I am not sure if the scheme I have is the correct:Win2003 with IISCCM 6.1I have created an example webpage with the follwing code:POST: 8443/axl/Host: 10.200.0.7:8443Accept: text/*Aut...
Hello Paolo, here you are the traces from "debug voice application script":Nov 29 12:05:14.520: //29024//TCL :/tcl_PutsObjCmd:proc init_perCallvarsNov 29 12:05:14.520:Nov 29 12:05:14.520: //29024//TCL :/tcl_PutsObjCmd: preced info : 0:-1:0 ,index : 2...
Thank you Giuseppe. Following your notes:1) I have not indicated NAT commands, but as I know:int gi0/0 ip nat outsideint gi0/1 ip nat insideip nat inside source route-map NAT interface GigabitEthernet0/0route-map NAT permit 1 match ip address 110acce...
Hello, I have seen the commands I need to configure the scenario, and this is what I get (Router A, I have supressed all commands which are no referred to vrf config):ip vrf DMVPN rd 10:10!interface tunnel0ip address 10.0.0.1 255.255.255.0 ip vrf for...
Hello, I have revised the version 8.5 and I have seen that it takes one month between the release of CUCM8.5 and the locale of this version, and the CUCM8.6 dates from 9 June...Regards.
