Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi all,Setup consists of:adsl router - 192.168.1.1sg 300 switch - 192.168.1.2dlink 8600ap WAP - 192.168.1.3win 2003 server - 192.168.1.20I would like to config two IP ranges, one for staff, one for guest wireless access. The dlink wap supports multi ...
Hi all,I have a ws-cisco 3560x-48p (running Version 12.2(53)SE2, RELEASE SOFTWARE (fc3) trying to use poe+ to power a cisco AIR-AP1252AG-N-K9 (running Version 12.4(21a)JY, RELEASE SOFTWARE (fc1))The wap is showing a combination of green, blue and red...
Hi allWe have approx 15 APs located around site. We have introduced 40+ notebooks recently and noticed slow access with our wireless network. I understand the recommend amount is roughly 10-20 clients per access point. The less clients connected t...
Hi allI have a hp 8000m connected to a hp 2524. This does not support vlan and two mac addresses. We have a cisco 2811 router which is connected to our cisco 2950. The 2950 is uplinked into the hp. The router has an admin network and a curric netw...
Thank you. A couple of questions.How do I set DHCP relay?Was my ip route command correct?Should the vlan2 dns and gateway be 192.168.2.3 as this is the switchs IP, this will then route it back into vlan 1 to access the adsl router? Am I missing any ...
After your command:Gi0/3 auto on 15.4 Ieee PD 3 20.0It is still not providing the full 20 watt for this 1252 wap.CDP is off on the wap, this could be the reason why its not detecting what kind of wap this is and what ...
I have tried the same command, same problem.Can you tell me the exact reason, e.g is there a difference between IOS versions? I read the release notes but not much mentioned regarding poe issues.You are running Version 12.2(55)SE and I'm using 12.2(5...
Hi all,Can anyone please confirm with a more detailed answer. Will upgrading the firmware to the latest fix this issue? I thought I was running the latest. Thanks
Unfortunately, I think I will need to buy new switches or fibre converters a create a seperate fibre connection and switch to seperate the admin lan and not use the vlan. As long as the hp 8000 or 2524 uses vlan and it see's 2 mac address gateway's ...
