Hi All,I hope someone can help..During the time of IPS4360 launched the Cisco Security Manager version was still 4.2, when I attempted to add device it gave me unrecognized sysobjID which is shocking... can anyone tell me how can I update the system ...
I have configured two routers to have RP of the same group 239.0.0.1, at any one time there should one RP for group 239.0.0.1, what I understand if there are two auto-rp for the same group the highest ip address wins the RP election, however this is ...
I was trying to do a HSRP test by reaching loopbacks of two routers from my pc. My PC can reach 192.168.100.151/32 almost immediately, however 192.168.100.150 takes 20sec to reach after i remove te1/1. I would like to find out if there's misconfigura...
I have a pair of 3750E-24PD-S stacked together, it seems after stacked together the stacked switch always flood the console screen with these messages which are not true:*Mar 1 00:16:15.427: %PLATFORM_ENV-1-RPS_FAN_FAILED: RPS fan failed*Mar 1 00:1...
I found that there is no force-switchover command under redundancy configuration mode. How can I do a switchover from primary RSP720 to secondary RSP720?I am using SSO and NSF.C7609-2(config)#do sh redundancyRedundant System Information :------------...
Hello,This is my first time doing this (url filtering and attempt to block user from downloading) for learning sake and for my future work with firewalls. No one is an expert in using a product the first time, instead of asking for answers research i...
Hi,thank you for your reply. I have found the answers minutes ago..... I turn on debug ip pim auto-rp and found that my router1 did not receive RP announcement from router2, whereas router2 receivee RP announcement from itself as well as from router1...
Hi,Thank you for your reply. Anyway we have found out the problem.The long recovery time was actually not HSRP but STP...I have neglected that the network is a mixed of L2 and L3 redundancy...
