cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

2006
Views
0
Helpful
1
Replies
Beginner

Stack member fan failed syslog message

I have a pair of 3750E-24PD-S stacked together, it seems after stacked together the stacked switch always flood the console screen with these messages which are not true:

*Mar  1 00:16:15.427: %PLATFORM_ENV-1-RPS_FAN_FAILED: RPS fan failed

*Mar  1 00:16:36.197: %PLATFORM_ENV-1-RPS_FAN_FAILED: RPS fan failed (Switch-2)

*Mar  1 00:16:42.472: %PLATFORM_ENV-1-RPS_FAN_FAILED: RPS fan failed

*Mar  1 00:17:09.517: %PLATFORM_ENV-1-RPS_FAN_FAILED: RPS fan failed

*Mar  1 00:18:45.348: %PLATFORM_ENV-1-RPS_PS_SIGNAL_FAULTY: 12V signal on RPS power supply A is faulty (Switch-2)

*Mar  1 00:22:55.001: %PLATFORM_ENV-1-RPS_FAN_FAILED: RPS fan failed

Switch-2 is the stack member, Switch-1 is the stack master. The RPS fan failed refers to RPS2300 or the internal power supply of 3750E? Even when I turned on the RPS2300 the stacked switch still display the messages. Also I have two RPS2300 serving stack master and stack member respectively both RPS2300 were switched off why the messages only refer to Switch-2 and not Switch-1? hmm...Hope some of you can help to clarify thanks

Additional output - stack information

Switch>sh switch

Switch/Stack Mac Address : 2c36.f8e6.4b00

                                           H/W   Current

Switch#  Role   Mac Address     Priority Version  State

----------------------------------------------------------

*1       Master 2c36.f8e6.4b00     10     1       Ready

2       Member a418.753a.8f80     1      1       Ready

Switch environmental information

Switch>sh env all

FAN is OK

TEMPERATURE is OK

Temperature Value: 35 Degree Celsius

Temperature State: GREEN

Yellow Threshold : 49 Degree Celsius

Red Threshold    : 59 Degree Celsius

SW  PID                 Serial#     Status           Sys Pwr  PoE Pwr  Watts

--  ------------------  ----------  ---------------  -------  -------  -----

1  C3K-PWR-750WAC      AZS154302LD  OK              Good     Good     300/420

2  C3K-PWR-750WAC      DTN1551E0J3  OK              Good     Good     300/420

SW  Status          RPS Name          RPS Serial#  RPS Port#

--  -------------   ----------------  -----------  ---------

1   Overcurrent     CiscoRPS          FDO1620YH42  1

2   Overcurrent     CiscoRPS          FDO1620YH7X  1

RPS Name: CiscoRPS

  State: Overcurrent

  PID: PWR-RPS2300

  Serial#: FDO1620YH42

  Fan: Faulty

  Temperature: Green

  RPS Power Supply A: Present

    PID             : C3K-PWR-750WAC

    Serial#         : DTN1604E03A

    System Power    : Bad

    PoE Power       : Bad

    Watts           : 300/420 (System/PoE)

  RPS Power Supply B: Not Present

DCOut  State   Connected  Priority  BackingUp  WillBackup  Portname        SW#

-----  ------- ---------  --------  ---------  ----------  --------------- ---

    1  Standby Yes               6  No         No          Switch            1

    2  Standby No                6  No         No          <>                -

    3  Standby No                6  No         No          <>                -

    4  Standby No                6  No         No          <>                -

    5  Standby No                6  No         No          <>                -

    6  Standby No                6  No         No          <>                -

RPS Name: CiscoRPS

  State: Overcurrent

  PID: PWR-RPS2300

  Serial#: FDO1620YH7X

  Fan: Faulty

  Temperature: Green

  RPS Power Supply A: Present

    PID             : C3K-PWR-750WAC

    Serial#         : DTN1551E05H

    System Power    : Bad

    PoE Power       : Bad

    Watts           : 300/420 (System/PoE)

  RPS Power Supply B: Not Present

DCOut  State   Connected  Priority  BackingUp  WillBackup  Portname        SW#

-----  ------- ---------  --------  ---------  ----------  --------------- ---

    1  Standby Yes               6  No         No          Switch            2

    2  Standby No                6  No         No          <>                -

    3  Standby No                6  No         No          <>                -

    4  Standby No                6  No         No          <>                -

    5  Standby No                6  No         No          <>                -

    6  Standby No                6  No         No          <>                -

Switch>

Everyone's tags (6)
1 REPLY 1
Hall of Fame Community Legend

Stack member fan failed syslog message

There are some threads in this forum which has these descriptions and may have been caused by a bug in the IOS.

CreatePlease to create content
Content for Community-Ad
July's Community Spotlight Awards