Hi,
I have setup radius authentication for my IE-3200, so that if radius fails it will use local account for access.
When local account is used it goes touser level and you need to know enable password to go lvl15 and do changes, this is how I need i...
Hi,
I have an issue with IE-4000 relay alarm (maybe same thing with with IE-3200).
We are using NC = Normally closed in all other manufacturer ethernet swithces and we need to do the same with Cisco IE-4000/5000/3200 swithces.
We have connected cable...
Hi all,I have interesting problem which seem to be bug or related to my configs.I did not find bug with these symptoms. I'm testing NEAT so that I have IE-4000 (IOS Version 15.2(6)E1) as authenticator and IE-3200 (IOS XE Software, Version 17.06.02) a...
Hi,I have a problem with IE-3200 and 802.1x where I try to authenticate PC with certificate via Windows NPS in server side. IOS XE version is 17.6.2, I had originally version 16.12.4, but I did upgrade as it was not working there, but no help.Same co...
Hi,I'm trying to figure out that can I prevent log files altering in Cisco switch?I'm using logging persistent to put syslog messages to flash:/syslogtest1/ What does actually that "protected " means? I just cannot find any detailed documentation abo...
Finally after firmware upgrade too (or I missed something at first test) I got this working.
So I used NO pin and "alarm relay-mode negative"command.
Now if I have port/one power down relay opens and we get alarm.
And if switch goes down relay opens ...
Finally after firmware upgrade too (or I missed something at first test) I got this working.
So I used NO pin and "alarm relay-mode negative"command.
Now if I have port/one power down relay opens and we get alarm.
And if switch goes down relay opens ...
Hi,
Did you guys verified this from Cisco and got this working?
I got the same problem with IE-4000.
If I use NC I get alarm for ports when I discunnect them, that is if alarm is configured for that port, so switch opens contact relay OK.
BUT if swit...
Thanks for the info!I might be stuck on that 17.6.x version, and base on my test NEAT kinda works with that too, even if that 17.8.1 added support for NEAT But that was weird that service password-encryption enabling on supplicant broke the authenti...
