Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Can someone provide a guidelines in calculating latency in NCS2006...What are the things to consider on this? Sample setup: Point - to - Point setupequipment with 10x10LC and 10GE client port. thanks
Hi,
We still have existing 10-DME-C customers, when is the EOS / EOL for this module?
What is the software version upgrade that can still accomodate the 10-DME-C module?
We have tried to insert a 10-DME-C module to a release 10.1 chassis. Though th...
Our customer needs to know the CPU utilization of their ONS15154 M12. They need to retrieve period CPU utilization darta..
Anyone have done this? Greatly appreciate your answers...
Thanks in advance..
How can show internode connection with AR-XP 10G-trunk do carry 10G traffic? Is there a way to view it thru CTC?
As check in PM section it just showed errors not the trunk bandwidth.
Thanks...
Can someone help me to find my way in accessing ONS15454M12 using CLI/TL1?
I'm not familiar with it as I always use CTC.
One of my costumer want's to perform logical audit of the system via CLI commands.
I'm not familiar with the information need to ...
Thank you William...
I was able to have this setup running thru 10GE tester in port 1 (LAN) and placing a hard loop on port 3 (WAN)... I just need to validate the actual applications when connected.
Based on the testing the throughput is just appro...
I was able to find a spare OTU2-XP ...
Now I need to configure it as 10GE LAN Phy to WAN Phy using ONS-XC-10G-S1=...
After provisioning the card configuration, what else do I need to do?
Do I need to create a circuit for this requirement, LAN Phy to...
thanks for the reply chris... in case of a live/existing network if changes were made specifically span losses and receive power what can I use as reference in setting the optical threshold?I was advised before that in a live network launching ANS p...
