Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Dear all,
I try to deploy LSC certificate on Cisco phone trough CME, but on the phone I can see “LSC : Not installed”.
But the secure SCCP is working, but i just want to have LSC certificat eon my phone for EAP-TLS with LSC certificate.
Tested w...
Dear all,
Context : I'm trying to configure EAP-TLS authentication for my Cisco IP Phones.
1 Server 2008 R2 : AD + PKI
1 Cisco ISE 2.0
Worktations : Windows
IP phones : 7942, 7965, 8831, ...
For my workstations it's working fine, but now i'm trying ...
Dear all,
I've issue with Cisco ISE 2.0.1.130.
All computers are joined to the Active Direcory domain (2008 2), and I make authentication for all devices (Cisco IP phones and Windows computers and for printers).
I’ve issue with Cisco ISE because ...
Dear all,
I've a Cisco 8831 connected on a Cisco CME 10.5, and i was upgraded the Cisco 8831 firmware from v9 to 10 (with sip8831.9-3-3-TO-10-3-1-v2 firmware) and after with sip8831.10-3-1-16 version and after with sip8831.10-3-1SR2-2.
The sip8831....
Dear all,I have a problem on the port-channel interface of my Cisco ASA 5506. I have no error on the 2 physical interfaces.ASA 5506 => Po1 => Gi1/1 to core switch => Gi1/2 to core switch => Gi1/3 = GUEST ...
Dear all,
I've extactly the same issue with cucm 8.5.1.10000-26 and 8.6.2.22900-9.
I tried to upgrade firmware SCCP69xx.9-3-1-3 to a higher version but it's not working.
I tried to upgrade to SCCP69xx.9-3-3-2, SCCP69xx.9-4-1-3 and SCCP69xx.9-4-1-3...
Yes all CUCM and phones are impacted. There are big problem on my phone, when i restart IPphone, there are :time problem, Softkey problem, URL button, ect... . All phone are registered on my CUCM SUbscriber1, when i execture show itl, i had a message...
