About harish.ab

harish.ab · 04-16-2010

Hello GuysI have a very basic questionThere is 66 KV power line going across the land where i want to set up a wirless and RF id based solution. Do this power linecause any interference for the communicationThanksHarish

harish.ab · 04-01-2010

Hello Team,I have multiple 10G and 1 G ethernet connected between the PE routers and doing L2 VPN over that. Just curious about how it does load balancingfor the traffic across the vpn sitesThanksHarish

harish.ab · 01-16-2010

Hello Guys , I have a basic question from MPLS TEI have 2 PE router and 2 TE tunnels between them . I have 2 different customers connected to the PE's . I want Customer 1 traffic need to take the path Tunnel 1 and Customer 2 traffic through Tunnel 2....

harish.ab · 09-09-2009

Hello Guys,We are having a 6500 switch with sup 720. the issue which we are facing is RCP application hungs when source and destination devices are in different vlan.And it works fine if both are in same vlans.Could anybody help me to solve this

harish.ab · 08-26-2009

Hello Guys,When I am configuring clock or NTP on WLC 4402 it crashes and reboot. Could anybody help me to solve this. Code is 4.2.099ThanksHarish

harish.ab · 04-22-2010

Thanks Dennis

harish.ab · 01-17-2010

Hello AmitThank you very much. This is what I wanted.Harish

harish.ab · 08-26-2009

I used config NTP command to configure NTP. as soon as I configure NTP, it start getting time from NTP server it reboots

harish.ab · 07-24-2009

exec-timeout is already configured as 5 min. but still there are idle line for weeks..

harish.ab · 07-24-2009

It worked . The state was 'CLOSEWAIT'. why is it so..? is there any permanent solution for the same.Thanks

Member Since	‎06-25-2008 08:41 PM
Date Last Visited	‎08-18-2017 03:54 AM
Posts	50

User Statistics

User Activity

Do high tension power line interfere with Wireless

L2 VPN load balancing

MPLS Multiple TE tunnel

RCP connection hungs when source and destinations are in different vlan

WLC Crashes when NTP/Clock configures

Re: Do high tension power line interfere with Wireless

Re: MPLS Multiple TE tunnel

Re: WLC Crashes when NTP/Clock configures

Re: Not able to clear idle vty lines

Re: Not able to clear idle vty lines