01-16-2010 04:20 AM
Hello Guys , I have a basic question from MPLS TE
I have 2 PE router and 2 TE tunnels between them . I have 2 different customers connected to the PE's . I want Customer 1 traffic need to take the path Tunnel 1 and Customer 2 traffic through Tunnel 2. Could anyone help me to understand, how we will configure that and in what basis it selects the path
Thanks in advance
Harish
Solved! Go to Solution.
01-17-2010 01:01 AM
Hi Harish,
What you want to achieve is "Per-VRF MPLS-TE tunnels". In this case, each VRF customer traffic can be passed through different MPLS-TE tunnel. You will find all the necessary config and explaination on the following link-
HTH.
Regards,
Amit.
01-17-2010 01:01 AM
Hi Harish,
What you want to achieve is "Per-VRF MPLS-TE tunnels". In this case, each VRF customer traffic can be passed through different MPLS-TE tunnel. You will find all the necessary config and explaination on the following link-
HTH.
Regards,
Amit.
01-17-2010 01:15 AM
Hello Amit
Thank you very much. This is what I wanted.
Harish
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide