Hello!
I have two routers: Cisco 2921 and Cisco 3925. I want add secondary power supplies to it.
What models of power supplies I must choose?
Power supplies, that already installed in routers:
2921: PWR-2921-51-AC
3925: PWR-3900-AC
If I understand ...
Hello!
I have a question: how much static routes Cisco 3925 router supports?
#sh licenseIndex 1 Feature: ipbasek9 Period left: Life time License Type: Permanent License State: Active, In Use License Count: Non-Counted License Priority: Medium
Hello!
I have Cisco Catalyst 2960 switch with iOS c2960s-universalk9-mz.150-2a.SE9.bin
I Testing Port Security option with additional settings. Here is the port config:
interface GigabitEthernet0/8switchport access vlan 5switchport mode accessswitchp...
Hello.
I have various questions about Cisco ASR 1000 routers (it's SBC function) and I believe you could help me with it. Links to the materials and related articles are welcome.
1) Does ASR 1000 has SBC failover and how it works? Are active sessions...
Hello.
I want to deploy a shared Stack Power between two independent Cisco 3750x swith stacks (see the topology in attachment)
Is this topology correct? Or Stack Power may be implemented only for each stack separately?
Hi,
This note didn't explained why I can configure firstly network-policy on the interface (without configure voice vlan on this interface) and after implement port-security commands, including switchport port-security maximum 1 vlan voice. Command n...
Yes, on 3925 I have many IP SLA options:
(config)#ip sla ? <1-2147483647> Entry Number auto IP SLAs Auto Configuration enable Enable Event Notifications endpoint-list Endpoint list configuration ethernet-monitor IP SLAs Auto Ethernet Configuration gr...
datak9 license you mean?
I Also have Cisco 3925 (without 'e') router, where IP SLA works correctly. There is it information:
#sh ver (output ommited)
Cisco IOS Software, C3900 Software (C3900-UNIVERSALK9-M), Version 15.4(3)M4, RELEASE SOFTWARE (fc1)
...
Guys, thank you for operational and important information, it's helped me to setups WLC correctly, active-passive ports are working.
There are addtional information about this in scenario 3 here:
http://www.cisco.com/c/en/us/support/docs/wireless/250...
Thank's for answer, but something addtion:
1) If I understand correctly, rate-limit function counts only received (incoming from client) packets on the port, describe of this option: "Configure the number of DHCP packets per second that an interface...
