Hello
On some Cat. 1111-C1111-4PLTEEA LTE modems are crashing randomly
https://www.cisco.com/c/de_de/support/docs/interfaces-modules/lte-wireless-wan-interfaces/200463-Generate-4G-modem-crash-dump.htmlThe telnet command in this post will not work ...
Hi there During testing LLDP-MED signalling to 3rd party phone on catalyst 2960x version 15.2(7)E1 I found, that C2960 sends no LLDP-MED tlv at all (tested with wireshark capture). Only default LLDP tlv are transmitted. According the documentation "C...
Hello all
I' am trying to get IKEv2 VPN from Windows 10 client to ASA 5508 (latest recommended version) with certificate based local and peer authentication and with additional EAP user authorization working.
But with local and peer authenticatio...
Hello Leo yes we updated the generic from Cisco site Cellular Firmware List==========================Idx Carrier FwVersion PriVersion Status 1 ATT 02.20.03.00 002.020_000 Inactive2 BELL 02.20.03.00 000.010_000 Inactive3 GENERIC 02.33.03.00 002.072_00...
Hello Soumya great video. But I' m looking for similar steps to read the LTE modem crash log of : Catalyst C1111-4PLTEEA routers with build in LTE. The special line for the modem does not exsist and the telnet command did not work. the output from...
Hello Rezasorry for the confusing formatting. If LLDP is enabled globally, it's also enabled on all interfaces: TEST-ACCESS#sh lldp interface gi3/0/23
GigabitEthernet3/0/23:
Tx: enabled
Rx: enabled
Tx state: IDLE
Rx state: WAIT FOR...
