I am migrating from an ASR9001 to ASR9901. Have a 3rd party 40G-ER optic that works in 9001 but not 9901. Used "transceiver permit pid all" command on both. The 9901 complains about the type (not the pid). There is a conmand "transceiver permit type ...

I am using the 702w AP on a controller running 8.0.133.0 code and using the 4 LAN ports on the AP. For the LAN ports - I want to be able to see a port and see what MAC address is learned on that port. Would also like to see basic stats to look for e...

I have a config with reverse SSH configured for access to a bank of serial ports used for console connections.The problem is if one of the lines/tty ports is in use and someone else tries to connect to the port in use they get logged in directly to r...

I am trying to get the IPv6 neighbor table from an ASR 1002 running asr1000rp1-adventerprisek9.03.04.02.S.151-3.S2.bin.From the supported MIB list IP-MIB is listed but the IpNetToPhysicalTable only yields results for IPv4, not IPv6 (and yes, I have I...