Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi all,I have an old UC520 with CUE 3.0.3, IOS 12.4(11)XW7 y CME 4.2(0)I need to install some SPA5X phones, so i need to upgrade to the 7.0.4 version but i am not sure about the direct upgrade to the last version spftware pack (8.6)I can download the...
Hi all,I am try to design a wireless solution where we will use WLC, MSE, ACS and we want to hace map location of the ap.It is a new solution, no a upgradingFor the use of map and location in Cisco Prime wich license is required?, just with the lifec...
Hi,I have an UC 560 with an autoattendant working fine, but when from the pstn need to call to an extension of a analog extension in a FXS port it says that is not a valid extension.If i check the option: "Allow external transfers" for the autoatteda...
Hi,I´m trying to desing a high Availability topology with two 4500, in this moment the company a 4500R-E with a supervisor 6e, and we are considering a second switch 4500R+E with supervisor 7E, is possible to interconnect both switch in high Availabi...
Hi,I have a customer with a cme 8 that needs to send the special code #00 that connects to another system in a sip trunk.I did a dial-peer with this destinattion-pattern like this:dial-peer voice 30 voip description ** #00 call ** destination-pattern...
Hi Christopher,I contact the SWP team and the answers was that there is not direct upgrade from old versions, so is necessary reinstall the complete systemThanks Christopher and Marcel for take the time to answer
Hello Darren,Thanks a lot for the answer, is clear for me now. So for this specific case i will have to enable "allow external transfers" to can call from the CUE to the CME to "unknow" extensions or is there some option to have a voicemail for this ...
Hello John,The configuration for the fxs port is:!voice-port 0/0/0 station-id number 115 caller-id enable!!dial-peer voice 1 pots corlist incoming user-local translation-profile incoming CallBlocking destination-pattern 115 port 0/0/0 no sip-register...
