About SBjohnk

SBjohnk · 02-27-2023

Hello,I'm working with a SPA112 running firmware1.4.1 (SR5) Oct 14 2019I'm trying to reconfigure the device by sending it a http request to the /admin/resync endpoint with a URL as a parameter.The device responds with a "400 Bad Request" error from t...

SBjohnk · 02-03-2023

Hello,I'm trying to understand out how to route calls using dial peers and translation rules and I'm just going in circles and getting a headache.I need to match incoming calls from my SIP provider, They send 11 digits to me.I need to route outgoing...

SBjohnk · 02-01-2023

Hello,I'm trying to configure an IAD to handle incoming sip calls to 7965 phones.I have the 7965 registered via SIP to the IADWhen I call the number assigned by my carrier the phone displays the incoming call as a Forward with the wrong caller ID.It ...

SBjohnk · 04-14-2022

Hello, I'm trying to get a old IAD trunked to my PBX to enable some skinny phones to call out.I've got registration working to the PBX but not calling. I can call between my two phones (extensions 100& 101) just fine but when I try to call the PSTN I...

SBjohnk · 02-07-2023

Great news, I've managed to get everything working except for RTP!To get rid of the Diversion header my provider is sending me I ended up needing multiple translation-profiles and dial-peers, Maybe there's a better way to do this but this is what I c...

SBjohnk · 02-07-2023

Incoming calls are working to the pots port and I can call out from the pots port, Still no RTP but that's not a problem I care about still.Incoming calls are working to the SCCP phones, and I can call out from the SCCP phones, The Diversion header I...

SBjohnk · 02-06-2023

Yeah, I didn't have working RTP earlier, but as this is only a test configuration in my lab I wasn't worried about that yet.I just removed a bunch of the stuff I had been trying from my configuration to try and get it down to just what you want me to...

SBjohnk · 02-06-2023

Doesn't look like my IOS supports a inbound profile. How about matching on a carrier-id? I've found references to that but can't find a good example, I've tried adding a voice source-group where I define a carrier-id.VOIP(config)#voice service voipVO...

SBjohnk · 02-06-2023

VOIP(config-register-global)#sipVOIP(config-sip-ua)#sip-profiles 1 ^% Invalid input detected at '^' marker. VOIP(config-sip-ua)#sip-profiles 1 inbound ^% Invalid input detected at '^' marker. dial-peer v...

Member Since	‎04-14-2022 09:44 AM
Date Last Visited	‎03-03-2023 01:21 AM
Posts	17

User Statistics

User Activity

SPA112 Resync not working

dial peers and translation rules

Incoming calls show as forwarded

Cisco IAD 2431 SIP Trunking help needed.

Re: dial peers and translation rules

Re: dial peers and translation rules

Re: dial peers and translation rules

Re: dial peers and translation rules

Re: dial peers and translation rules