Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Good day,I am using a Router Cisco 1841 as DHCP Server and I trying to configure a manual binding but is not working, here is the configuration:Router#sh runBuilding configuration...Current configuration : 1026 bytes!version 12.3service timestamps de...
Good DayI have a Router Cisco 805 and I trying to recover the lost password, but when Press Break on the terminal keyboard within 60 seconds of the power-up to put the router into ROMMONappear this and i don't know what i have to do:TinyROM version 1...
Hello.Thank You very much by your Interesting,I´m using MRTG to monitoring all my Wan Network. but i need to use the MRTG to monitoring the number of voice port that are in use, similar to use "sh voice port summary", how i do that????Please HelpTha...
I solved the problem thank guy gezjosrankin - Cisco Systems Sep 7, 2004, 7:13am PSTYou need to be at the boot# prompt, not the boot> prompt. To recover from the boot> prompt, do this: boot> enable debug password: em gubed boot [DANGER] password new: ...
I solved the problem thank guy gezjosrankin - Cisco Systems Sep 7, 2004, 7:13am PSTYou need to be at the boot# prompt, not the boot> prompt. To recover from the boot> prompt, do this: boot> enable debug password: em gubed boot [DANGER] password new: ...
Hi, thank you very much by your answer. I did read the document and my configuration is similar.the entire configuration oh the remoter router is this:Router#sh runBuilding configuration...Current configuration : 2155 bytes!version 12.2service timest...
Thank you very much but i dont have cco account.i activate a debug dlsw in the router 1760 (remote) and this is the message Router#04:28:08: DLSw: START-TPFSM (peer 1.1.1.1(2065)): event:ADMIN-OPEN CONNECTION state:DISCONN04:28:08: DLSw: dtp_action_a...
