Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Greetings! We recently purchased a C1300-16P-2G as a possible replacement to our C1000 models (which is what Cisco recommends). It turns out that these aren't running the full iOS on them, it's some sort of 'Small Business' like setup, even though ...
I recently implemented a new Cisco WLC 3504, running 8.5.120.0. I'm running into a problem where the 'Potential Honeypot AP detected' trap isn't getting sent out. It's showing up in the 'Trap Logs', but the trap receiver never gets it. It gets a...
I have a new ASA 5505 I've been messing around with. I'm setting it up between two different private IP based networks (two different companies) and with it is a static nat mapping to allow them to access one of our machines. The "public" IP addres...
Hello all,We have a Wireless Infrastructure already in place using several 1130AG WAP's. The authentication for the clients is done by setting the WAP up to pass the credentials to our Windows 2003 IAS server (RADIUS). The client side works fine. ...
Hello all. This may sound strange, but I am having difficulty getting a batch of G5486's working in our Chassie switch. Here's the details:The switch I'm trying to put them in is a C4507R with current software on it. It's being put in the WS-X4418...
We also noticed that it is now basically 'forcing' new users to enroll with the Microsoft Authenticator even if they're already enrolled in Duo. Did anyone else find a solution? We have all of the settings that might enforce this in our tenant tu...
I too ran into the issue of expecting an IOS switch and got this SBE type switch. Basically what I did was use the GUI to try and configure everything as I wanted first, then compared the default config to the updated one to see what needed to be d...
I think I was able to get it figured out. In case anyone was interested, I had to put the ports into trunk mode to make it work, along with the network policy. On our other switches it would work even in access mode. Here are the specifics of wha...
Yeah I get that it's still more like an SMB switch, but I'm looking at these mainly for remote closets and don't need anything special. The only other compact switch left is the 9200CX, which is way overkill for a closet (and a lot more expensive)...
