Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I'm trying to create a custom syslog policy to get notified when certain interfaces go up/down. It seems you can only create policies based on facility, severity, and mnemonic fields. So I created a policy that looks like:Facility contains LINKMnemon...
On a 3802 or 4802 in autonomous mode, can you set up the mgig port to trunk wired clients as well as the wan traffic? IE, one vlan for the wan/outbound, then another vlan to nat wired clients to? I'd rather do that then use the aux port as that limit...
We have an ise 2.1 cluster that's been working for some time. Intent was to start a non-production 2.7 cluster, get it up and running, then move production over to it. Created new vm #1- installed 2.4 - isntalled patch 13 - restored 2.1 backup - upgr...
What exactly is inside an operational backup? Docs just mention "monitor and troubleshooting data". I am upgrading from 2.1 to 2.7. A new set of vm's will be built. Production will be kept on the old 2.1 until the new set is up and running and proven...
We have an 8540 running 8.5.140.0. On our guest ssid we use simple webauth with an AUP and I accept button, no other input required. It's worked for the longest time just fine. It continues to work with windows clients and android phones. Recently IO...
Check docs. The leds have different modes they can be in (changed by hitting the mode button on the front) that can make the leds mean different things. Activity, speed, duplex, etc. I can't vouch for the 3850 series but on other series switches I wo...
Those release notes are for the IOT/Industrial series switches. This is the link to the 2960x series. It does note that CSCvv94988 is resolved. And it's not yellow star'd yet so as policy we may not consider it for production. E0a is still the target...
Yep... there must be a glitch somewhere that intermittently triggers this. #1 started with a different version so I can't consider that... but why it happened on #3-#4-#5-#6 but not #2 is a mystery. Had it happen on my #2 machine I would never have j...
Thanks Damien. That’s what I figured but wanted to make sure before going further. The install was going smooth but just got interesting... that’s a topic for another thread though.
