Single port APs - wired clients?

[Y C]

On a 3802 or 4802 in autonomous mode, can you set up the mgig port to trunk wired clients as well as the wan traffic? IE, one vlan for the wan/outbound, then another vlan to nat wired clients to? I'd rather do that then use the aux port as that limits wired clients to 1gig.

[patoberli]

Have a look about the AUX Port configuration:

https://www.cisco.com/c/en/us/td/docs/wireless/controller/8-7/config-guide/b_cg87/ap_power_and_lan_connections.html#converting-aux-to-lan-port