Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello. I have the following scenario 3 sites (A,B,C) with 1 WLC located at Site A. We use the same SSID's at every siteall Access points at every site are in flex connect mode. The SSID's are configured for local switching. I have three flex connect ...
I have a nexus9k-C9327PX-E switch. I do not know the password and thus I would like to wipe this switch. I have tried what is suggested here: https://www.cisco.com/c/en/us/td/docs/switches/datacenter/sw/password_recovery/b_nx_os_pwr/nx_os_pw.htmlI ha...
In our network we have a 3750X switch operating as our core switch. We also have four 2960S switches. Three of the 2960S switches are plugged directly into the core. The fourth is plugged into another of the 2960's. One of the 2960 switches is our "...
by adding the radius servers under local authentication in the flex connect group settings, while that disable the use of the central authentication via the WLC when the AP is in connected mode.
Hello could you please share the configuration steps for the external authentication method. I have 1 WLC and 3 sites. I have a radius server set up at each site. When the access point is in connected mode it should use the WLC to help authenticate....
