Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi all.I want to build a portable accesspoint that uses hwic-3g-gsm and a HWIC AP card AG or G.Or a model with build-in Wlan+3G.But i cannot find information what models that supports 2 HWIC card at the same time.Do i need a 3825 or can i use 1841 or...
Anyone got an example file how to configure the ap:s to be able to send client walkabout data to WLSE 2.7?I have enabled WDS on my AP:s and set wnm to WLSE ip address but it says not auth.Regards Bjorn Sundin
Thank you for answer.You can not use 2 Cisco HWIC-AP card at the same time.But it may be possible to use 3G+AP card at the same time.This limitation could be that you can not use 2 HWIC at the same time or just a limit so that you do not use 2 HWIC-A...
Even if you can compress the file i do not think it will work you probably need the run-from-ram version instead.c1600-y-mz.122-31.bin is the one you want.Min memory is 12MB
Ctrl-break can be diffrent look at this page it will help you.http://www.cisco.com/en/US/products/hw/routers/ps133/products_tech_note09186a0080174a34.shtmlRegards Bjorn Sundin
