Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I have a voice gateway with FXO ports and the calls are disconnecting after 180 seconds.With "debug voice vtsp all" enable: lpvgw01#...Aug 10 18:16:15.324: //1041/808327E15C00/VTSP:(0/1/0):-1:1:1/vtsp_ring_noan_timer_start: Timer Start Time=118723...
I have a 805 router connected to a privated leasead line in the serial interface (hdlc protocol). I need Dial Backup for this serial link. This is possible with the console port?
I have a router 2821 with two Internet links over "one" ethernet port. For this, I configured the interface GigabitEthernet0/1 in two subinterfaces with Vlans (interface GigabitEthernet0/1.998 and interface GigabitEthernet0/1.999). Betwen the router ...
Dear Nick, How did you solve your problem? It was a hardware or software (a NX-OS bug) problem?I´m with the same situation, I have a N4K-4001I-XPX with NX-OS 4.1.2.E1.1f and the log is the same, not for all ports at same time, but when a loopback tes...
Alexander,The Dynamic Vlan worked with the SG200-26?I will buy this switch and I need this feature. At documentation I was with doubt too.Thanks.Gustavo
I'm with the same problem. Today, when I startup my VPN client the error is the same. The Cisco VPN Service doesn't appear.Yesterday was working normally. This is a windows update problem?
