Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello!I am facing the following problem , after the update of CUCM 11.5 to 14 , when trying to register CUCM to CSSM offline ( i don t have an open Internet connection ) in the License Management tab on the transport settings , after i insert the URL...
Hello ! I am using external phone number mask to make outside calls , but now i m facing a problem regarding to cisco 8865 model . I am using 7 digit number for internal calls and 10 digits for outside calls , after i insert 7 digits my call is autom...
Hello ! I am having a problem with a SIP trunk , i can make calls to outside PSTN after i remove and reinsert the static route to the SBC provider . The connection works for a limited amount of time , then i receive 503 service unavailable so i alway...
Hello .I am encountering a problem with CUCM 11.5.1 .I am currently trying to set my ip phones to send and receive calls from outside numbers . At the moment my inside calls to outside are being sent successfully , but when an external number tries t...
Thank you for your response , i found the problem , in translation pattern i had a shortcut 0xxx and it was on "urgent priority" , now i m facing the following problem , the call lasts around 10-15 seconds until it s launched on this translation patt...
I dont have urgent priority set neither on line or pattern , line 1 works as following , i insert 7 digit ,call won't be launched until i select call on the phone menu , i can insert 10 digit , call wont be launched until i press call . After i selec...
It was a digit number mismatch , also , the called party transform mask must be set on both ways , in and out , thank you so much , you saved 2 weeks of work !!!
Yes it s a sip trunk , my internal dialling number format has different digit number than external one, after i set external phone number mask , my call is made successfully to external devices but it wont work the oppsite way