Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Wondering if I can get some clarification on the compatibility of the 9120AXE Access Points and AIR-ANT2566P4W Antennas.I have seen conflicting information on these antennas being connected. Can you connect these antennas directly to the access point...
Hi All,
I hope I am posting this in the correct area. I have a Cisco 2811 router with a VIC-4FXS/DID card. The issue I am having is when someone calls the number assigned to the FXS port it rings but as soon as it is answered it goes to a fast busy....
Hello Experts, I have been digging for hours and wondering if this is even possible. Is there a way I can have call come to my extension, play my Unity Greeting, but store the message in a different Unity mailbox? Cisco Unity Connection version: 9.1....
I had a similar issue with a TRENDnet PoE Repeater/Extender. It said is was capable of PoE+. It would only draw 15.4 watts. I added the following config at the interface level:power inline port 2-eventThe port started seeing the extender and drawing ...
I know this is an old post but I thought I would share what fixed this for me.
It turns out the specific line settings for the phone had the incorrect phone number mask so my SIP provider was rejecting the call. Something to look at if anyone else r...
Thanks Buddy! Turned out to be the device pool issue. The port was not set to the incorrect device pool and the wrong codec was being used... we have a specific device pool for faxing. Not sure how I missed that! Bad Bad Bad!!!
