Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi Everyone,
I have a setup as attached. R1 and R2 are running HSRP for internal network. there are two links from ISP that are terminated in R1 and R2. If R1 is down then HSRP will transit the traffic to R2. If R3 fails then we can setup tracking...
Hi Everyone,
I have a 4510 switch with dual redundant supervisor "WS-X4516-10GE Supervisor Engine V-10GE"
I need to provide two 10G Uplinks to 2960 switch having 10G SFP Module and i need two 10G copper uplinks to some servers. the supervisor ha...
Hi Everyone,
i have a network that looks somehow like attached. I have multiple hosts connected to Core switch and core switch is by default forwarding all traffic to R2. static route for that is already there in switch which we can not change.
I...
Hi Everyone,
I'm trying to limit traffic to 80 mbps on and interface. I'm using the following configuration
ip access-list extended FW-80mbps
permit ip any any
class-map match-all FW-80mbps
match access-group FW-80mbps
match access...
i changed that as well but no success. boot varriable is pointing to new IOS. Please let me know if there is any other command required
BOOT variable = /bootflash/isr4400-universalk9.03.13.05.S.154-3.S5-ext.SPA.bin,1;CONFIG_FILE variable does not ...
