Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I have a vWLC controller, and I've requested SmartNet support from a partner. They've asked for the UID. Could someone guide me on how to obtain it, or if there an alternative method to acquire SmartNet for this virtual controller?
I'm looking to implement a password requirement for making outbound calls on Cisco C8800 series IP phones within our Cisco CallManager Express (CME) environment. The scenario I aim to achieve is that when a user wishes to dial from inside to outside,...
I have Cisco Router ISR4331 with UC IOS, A-Flex License License.
For Voice, i got the connection from ISP i.e. SIP TRUNK line and he provided these codecs , g711 ,g729/t.38 port 5060
Please find the below config:
voice service voipip address trusted ...
I need to know that Can ISE supported MAC-based authentication as per the below request:
- If i want to achieve mac based authentication in essential licenses if yes then can I do it?
- if i want to achieve mac based authentication in the Advantage l...
TestSw#sh running-configBuilding configuration...
Current configuration : 15982 bytes!! Last configuration change at 19:51:36 UTC Mon May 20 2024 by admin!version 17.6service timestamps debug datetime msecservice timestamps log datetime msecservice c...
This is the issue we face once we connect with Newly Cisco IP PHone
%DOT1X-5-FAIL: Switch 1 R0/0: sessmgrd: Authentication failed for client (0076.861a.2790) with reason (AAA Server Down) on Interface Gi1/0/17 AuditSessionID 099FA8C00000001E973BE640...
I have deployed it but not showing show UDI license on CLI but when i see in the GUI it show me UID is it ok ?after getting this UID i need to provide my Cisco Partner am i right ?so he can get the smart net from Cisco
I have deployed it but not showing show UDI license on CLI but when i see in the GUI it show me UID is it ok ?after getting this UID i need to provide my Cisco Partner am i right ?so he can get the smart net from Cisco
