Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
(Cat Centre 2.3.7.9, WLC's 17.15.3, APs 9120 internals and externals)We had a single 9800 HA pair managing all of our sites. Due to issues getting approvals from each BU for outages to do updates etc, we are rolling out a few more HA pairs, 1 for eac...
We have some Cisco Webex units (RoomEQ type) that have all the ancillaries like mics on a seperate vlan back to the RoomEQ where they get a 169.x.x.x address from the RoomEQ unit. Then the RoomEQ unit has a second connection which has internet connec...
I was in the midst of trying to write a Cat Centre template to handle the prompt when using 'vtp primary' exec command for a vtp v3 server.Then I realised I could just tack on the 'force' option and bypass the check. But I wanted to know what it was ...
I am trying to write a template that sets the switch VTP mode 3, configures domain and password and then depending if the hostname contains core or distro, sets the mode to server, and if it's core to also set to primary server.For the core, via cli ...
I am interested in monitoring the total power consumption of the 700+ switches in our network.We have over 1500 APs plus the usual assortment of IP phones and other things running over PoE.The idea is that I can get a baseline for the overall consump...
Hi Enes,This works perfectly, thank you so much.I used Catalyst Centre to create the mobility group and add the WLCs to it.Then I provisioned each WLC and I changed old WLC to be secondary controller and new WLC to be primary WLC for the site.I TICKE...
Hi Enes,Thanks for the reply. We don't have to provision often, but we did recently change to update ISE cluster which required a reprovision. Which then we started receiving reports of the RoomEQ systems not working and it brought back memories from...
While you're there, might be good to do an 'install remove inactive' to get rid of that 17.12.4 bin file to make room for 17.12.5. Although 17.15.3 is now showing as a gold image if you want to go that far
