This is helpful, but unfortunately DNAC/Catalyst Center only allows command runner for up to 20 devices at a time. It would be more useful to be able to download all running-config to several text files then grep against them for the config needed.
...
This worked for me, thank you.sudo nano /etc/ssh/ssh_config
[Enter Password]
Locate the line ‘ # Ciphers aes128-ctr,aes192-ctr,aes256-ctr,aes128-cbc,3des-cbc’ and remove the Hash/Pound sign from the beginning.
Then paste the following on the end; (...
Although there is not a specific command to do so, I have found that by disabling and re-enabling port-security on an interface will reset the violation counters to 0. Interface gi1/0/24 no switchport port-securityswitchport port-securityexit sh por...
