About Moh Ka

Moh Ka · 02-06-2017

Hi Expertise, i have a new ASR9K rebooting continually so i used turbo-boot and installed IOS-XR [confirmed by install commit], the problem is when the router reloaded stuck in boot mode again RP/0/RSP0/CPU0:ios(admin)#show variables boot Tue Feb 7...

Moh Ka · 08-28-2016

Hi Expertise, I have a question: Is RSP880 comparable with PWR PEM v1 (2 module) in chassis 9006? note: max pwr per v1 module is 38A and chassis with 2RSP 880 = 40A

Moh Ka · 06-28-2016

Hi Experites, Q: Is PWR-2KW-DC-V2 comparable with A9K-RSP880-SE?

Moh Ka · 05-10-2016

Hi Expertise, I have a confusing with number of ports [A9K-MOD80-SE= and A9K-MOD160] cards. In the other word is every MOD card needs MPA adapter or it's ports are build in. Example: if i get below cards, how many ports i have: A9K-MOD80-SE= A9K-MP...

Moh Ka · 04-20-2016

Hi Expertise, i will power on new RSP880 at ASR9K, So what's default/current ios release on that RSP

Moh Ka · 02-06-2017

Thanks Aleksandar, the problem is how to move files from mem: to disk0:, by default IOS files coped to disk0: but suddenly extract to mem: . i found that problem in turbboot > boot sequance TURBOBOOT=on,disk0,format sync and after restart files cop...

Moh Ka · 05-10-2016

Thanks AleKsander, confirmed.

Moh Ka · 04-21-2016

Thanks Mark, I get the problem, it was when using 5.2.2 mini-vm and solved when using 5.3.3.

Moh Ka · 04-21-2016

Hi Eddie, when i boot the RSP from the first time it logged in to ROMMON, i used below steps but i don't know right mini file to use? unset BOOT unset TFTP_FILE sync unset BOOT_DEV_SEQ_OPER unset MIRROR_ENABLE sync priv diswd IP_ADDRESS=192.168.1.241...

Moh Ka · 04-20-2016

thx Eddie, it's working now with 5.3 and need to upgrade to 5.3.3, so is tar file is enough.

Member Since	‎05-11-2015 04:10 AM
Date Last Visited	‎03-13-2020 02:22 AM
Posts	16

User Statistics

User Activity

ASR9K Stuck in ROMMON

ASR9006 RSP880 with PEMv1

ASR9K | RSP880 with PWRv2

ASR9K | A9K-MOD80-

Power on new RSP880 at ASR9K

Thanks Aleksandar, the

Thanks AleKsander, confirmed.

Thanks Mark,

Hi Eddie,

thx Eddie, it's working now