ASR9K Stuck in ROMMON

[Moh Ka]

Hi Expertise, i have a new ASR9K rebooting continually so i used turbo-boot and installed IOS-XR [confirmed by install commit], the problem is when the router reloaded stuck in boot mode again

RP/0/RSP0/CPU0:ios(admin)#show variables boot
Tue Feb 7 04:54:50.627 UTC
Node 0/RSP0/CPU0:
BOOT variable =
CONFREG variable = 0x2102

Node 0/RSP1/CPU0:
BOOT variable =
CONFREG variable = 0x2102

RP/0/RSP0/CPU0:ios(admin)#show install committed summary
Tue Feb 7 04:53:15.510 UTC
Default Profile:
SDRs:
Owner
Committed Packages:
mem:asr9k-asr901-nV-px-5.3.3
mem:asr9k-services-px-5.3.3
mem:asr9k-9000v-nV-px-5.3.3
mem:asr9k-video-px-5.3.3
mem:asr9k-optic-px-5.3.3
mem:asr9k-mcast-px-5.3.3
mem:asr9k-k9sec-px-5.3.3
mem:asr9k-mpls-px-5.3.3
mem:asr9k-mini-px-5.3.3
mem:asr9k-mgbl-px-5.3.3
mem:asr9k-fpd-px-5.3.3
mem:asr9k-doc-px-5.3.3
mem:asr9k-bng-px-5.3.3
mem:asr9k-li-px-5.3.3
mem:asr9k-services-infra-5.3.3
i 

[Aleksandar Vidakovic]

After turbobooting the committed packages are in memory ("mem:asr9k-..."). After turboboot you have to run the install process to have the installation saved on on disk0:.

Please use 5.3.4 instead of 5.3.3. We strongly suggest 5.3.4 for all asr9k deployments. See:

https://supportforums.cisco.com/document/13212901/ios-xr-release-strategy-and-deployment-recommendation

Regards,

/Aleksandar

[Moh Ka]

Thanks Aleksandar, the problem is how to move files from mem: to disk0:, by default IOS files coped to disk0: but suddenly extract to mem: .

i found that problem in turbboot > boot sequance

TURBOBOOT=on,disk0,format
sync

and after restart files coped to disk0: instead to mem;

Many thanks again for you reply.