Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Here is a question for you:Is there a way to restrict the traffic on a 3640 with a HSSI (DS/3) connection to less than 45 Mb? We are having a problem with backups saturating the connection and not letting any other traffic through. Therefore, when ...
I have an 827 ADSL router connected to my DSL service provider. Before I had this router, I had a linksys router providing all the NAT and port forwarding functions. Right now I have NAT configured for all my internal computers to translate to my s...
I have started converting our Access Points to the IOS software. So far, I have two 1200 access points that will stop authenticating clients after about 4 days. I was wondering what others are experiencing with the conversion to the IOS software an...
Here is the scenario. I have an AP 1200 with an 802.11a and 802.11b antenna. As most would guess, when you leave the a antenna range, the dual-band client falls back to the b antenna. But, when the client comes back in range with the a antenna, it...
I have a question that someone can probably answer pretty easily. My wireless users are very picky. They don't want to see multiple SSIDs. Especially when you have a dual band AP. So, I would like to have the same SSID for each antenna (a and b) ...
Well, if there is an easier way I would like to avoid bridging also.My router has six sub-interfaces on the fast ethernet and serial interface. Then I added each interface (ex fas 0/0.1 and ser 0/0.1 = bridge-group 1) to a bridge group. Then I also...
I used the set port host / command, which I thought set the port to portfast and removed all channeling and trunking parameters. I have other servers connected in the same fashion as the CallManager and they are working just fine. Also, I have trie...
When you said: "Because you've configured exec authorization, you do need to send down some exec parameter otherwise they'll fail and not get in (which is what you're seeing)"...did you mean that RADIUS should send the exec parameter? Or, did you me...
For the ease of management we have moved all of our gateways to the MGCP services. What you are trying has been a headache for us. We have not been able to define an MGCP gateway on two separate Callmanagers also. Everything that I have read on CC...
