Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi Guys,I am having real trouble setting up a Cisco 2811. I am connecting it to an E1 ISDN30 line and using it for remote user pstn dial up.The users can dial in, be authenticated via EAP and given an IP address no problem. They can work happily on t...
Hi,I have aaa auth and snmp / syslog running on my Cisco3640 for dial in users. The users are authenticaticated against a Win2k box and the resulting connection info is sent to my syslog/snmp server. The problem is the info is not very good. It basic...
Hi,Is AutoQos really only good for networks that carry voice and video? I am looking at implementing Qos on all my WAN links but they only carry data. Would I get any benefits from AutoQos or should I be looking at a different approach?thanksRichard
Hello,please see the attached jpeg for a fuller description of my problem.Basically, when I have 2 VLANs on the same switch as the router dong the inter vlan routing I can speak between vlans. However, I am trying to trunk across multiple switches an...
Hi,I have been tasked with setting up a small network within our company. The network is to utilise some existing fibre links but to stay seperate in terms of connectivity/reachability etc. Therefore I am trying to VLAN one of our cross site fibre li...
Thanks for the responses,It turns out the "Dialer idle-timeout 0" was needed on the async interface. The dialer in-band command defaults to 120 seconds dropping of the line if it sees no interesting traffic.This doesnt exlain why the line was being d...
Hi,we use NEDI. We use it for tracking config changes and syslog / snmp stuff. It keeps a track of all your configs in a mysql db also.There is a free vmware application for it if you want to try it out quickly,http://nedi.sourceforge.net/about.htmlc...
Thanks fot the reply,I do not have a problem with getting radius up and running, it is already working ok. What i want to do is limit the users who can log on (telnet on to the cisco etc )via radius. by this i mean there may be 250 valid dialin users...
Thanks for the reply,I am only looking at checking the status of the isdn lines i.e. up or down. I am not interested in any specific data.I will have a look at the OID you suggested...
