Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
With reference to above Topology involving ACCESS VLAN's:Generally, it is well defined and understood that : Routing is required to switch & reach the traffic between 2 different VLAN's.So, defined the static route / default route ( In this example ,...
Symptoms:
With the attached diagram which has L3 point-to-point connectivity with help switches - why DR/BDR election happens here, Inferred below details:
Router0#show ip ospf neighborNeighbor ID Pri State Dead Time Address Interface192.168.20.1 1...
Almost a month from August 25th -I have observed problem on launching of CISCO Packet tracer application - with Netacad crednetials. How to launch the CISCO packet tracer application from WINDOWS or UBUNTU OS?Kindly share the procedure.On logging as ...
As there is a change in syllabus with CCNAv1.1 - I am having basic understandings and work experience with RH-294 knowledge ( learned skills). I wanted to know any question bank or right source of learning materials to prepare for 3rd attempt:Toward...
Referring: cisco_community_q1_p1.jpeg(Attachment) When a topology is described as below:R0----BROADCAST(AREA-0) -----R1----POINT2POINT(AREA-1) ----R2As per OSPF protocol definitions: 1) Only on BROADCAST network DR/BDR elections happens2) Here with a...
Thanks for your sharings and prompt response on detailing the need of CLI - "ip ospf network point-to-point" to explicit on making the OSPF link as Point-to-Point. I shared the content for reader on OSPF topics, to get a diagrammatic understanding a...
As Per VLAN, RSTP allows to restruct the spanning tree with respective to VLAN , the sys-id ext denotes the VLAN ID for which the associated Bridge is configured irrespective of choosing Root bridge stages.In Per-VLAN RSTP, if a VLAN is not properly ...
Actively looking for resolving the requested problem - Please share the steps : If known.I am likely to help on CCNA exam takers on CPT labs - So, required CPT tool support at earliest.
While i retook 2nd attempt , went through learningnetwork , netacad and cisco U portal to gear up my learnings to meet the CCNA questions. Personally, I felt questions somehow verbally matched with skillsforall - elearning questions and materials p...
