Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello Folks, We are reunnon Hyperflex 2.5, the installer VM was corrupted, can we deploy a new one and manage the existing Hyperflex Infra (Adding new Vlan and upgarding nodes ....) Thank You,Kamal
Hello Folks,
We need to map an USB Device (sms model) to a VM installed on ESXi5.5 on a B200M3, can this be done by using the one of the USB ports present on the server KVM Local I/O Cable ? if not any suggestion will be very appreciated.
Kind reg...
Hello Folks,
There is my configuration :
1x UCS UCS-5108 4x UCS B200 M4 (1x VIC 1340) 2x UCS 2204XP (4x FET-10G)
2x 6248 (8 FEX-10G to chassis)
each 6248 will have 2 10Gb uplink to two cisco 6800 (in vss)
We will install windows 2012 bare Me...
Hello Kirk,
I have this scenario UCS FI6248 UCSM 3.1, I need to connect a V3700 storage that is connected to a EN4093R 10Gb Ethernet in with 10GB port.
Questions:
1) if I have to connect the FI to EN4093r have we to configure the uplink port to...
Hello Kirk,
I want to map a Sierra Wireless Modem MC8795V to a VM that is already on the B200M3.
At this time the modem is mapped to the VM by using the vCenter Client lunched from a bareMetal WIN2K8 where the modem is directly attached.
Kind Reg...
this information come just in time
here is my use case :
The B200M4 (W2K12) are Recorder Server of for a CCTV solution : they have to be attached to two network :
vlan1 (Camera Networks) that will handle Video files from the camerasvlan 2 (Storage...
