Cisco 6509 is running v12.2(18) SXD6 and is sending hello packet with flag option set to 0X12 when GGSN NOKIA is sending hello packet with flag option set to 0X2.The bit option that differs between Cisco and Nokia is the EA bit. It says that Cisco io...

Using this configuration to radius control console and telnet access :aaa authentication login default group Sts-radius localaaa authorization exec default group Sts-radius local aaa accounting exec default start-stop group Sts-radiusIn wlse I've con...

Would you recommand a white paper regarding how to configure a Siemens ip phone on a Catalyst using dhcp option 43? We've made test and it doesn't work. Could be the firmware, but not sure.Thanks for your help

I don't have any equipment at home to make the following test :- Assuming that 2 catalysts are connected through a GigatbitEthernet interfaces- Assuming that both interfaces are configured with "sw mode dynamic desirable" and no other command.- Assum...

I would like to install config files using tcl script. Is there simple script I could use ? Or any other mean ?Also is it possible to suppress the prompt asking for a confirmation when doing TFTP ?