tomrayjr
Level 1
Level 1
Member since ‎09-22-2003
‎09-02-2020

User Statistics

  • 40 Posts
  • 0 Solutions
  • 5 Helpful votes Given
  • 0 Helpful votes Received
Recent Badges
1 Helpful Vote
20 Replies
10 Replies
5 Replies

User Activity

We currently run System version: 8.6.2.20000-2 Unrestricted. I see where a minimum of 9.2xxx is required to utilize VG310 & 320 Gateways. We are upgrading to a version 10.x, but not 10.5. Is 10.5 required to support these devices OR can one of the ea...
Got a good one here...Scenario: I have a 1921 router with an 8-port switch module. I'm trying to limit the total amount of traffic coming into one specific interface of the switch module (no more than 2mbps) because it overloads my wireless network c...
I am running a 15.1 or so version of the IOS on a 1921 router. I have plugged in the external PoE injector into the router, and the PoE light on the front of the case is lit green. I have no options in the IOS to enable power on the EHWIC ports. Any ...
I have a router with the following 2 interfaces:interface Vlan1 description "192_Network" ip address 192.168.1.253 255.255.255.0 ip nat inside ip virtual-reassemblyinterface FastEthernet4 description "172_Network" ip address 172.16.1.253 255.255.255....
I have a 2801 Router that gets the following error when I try to manually bring up mgcp:Sep 19 20:36:04.753: ISDN Se0/1/0:23 **ERROR**: L2IF_SendPkt: idb is NULLSep 19 20:36:04.753: ISDN Se0/1/0:23 **ERROR**: L2IF_SendprimPkt: L2IF_SendPkt failedHas ...
Community Statistics
Member Since ‎09-22-2003 12:24 PM
Date Last Visited ‎09-02-2020 12:40 AM
Posts 40
Helpful Votes Given To