Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I have enabled connections using Cisco AnyConnect (version 2.0.0343) to our ASA (version 8.0.2). The group-policy I'm using is the same that we have used for previous IPSec client connections.Using the IPSec client, split-dns works as expected. How...
I want to enable "passive-interface default" on my EIGRP config and specify certain interfaces as "no passive" (presently they are all active). However, when I issue the "passive-interface default" all my interfaces go passive and I must at that tim...
I have a network as follows:mcb-core t2/1 directly connected to t2/1 on hbg-core g9/8 connected thru ethernet net to g7/5 on hbg-core g9/33 directly connected to f0/1 on mcb-vpnhbg-core t2/1 directly connected to t2/1 on mcb-core g7/5 conne...
We are trying to connect a partner to our network with support for dynamic routing and failover between a primary T1 connection and a backup Internet L2L IPSec connection. We use EIGRP internally, but because of the firewalls in between us and the p...
I am in the process of ordering a 6509 with Sup720-3B and had some memory questions.There will be 6748-GE-TX, 6724-SFP, and 6704-10GE cards in the chassis. Right now we will use centralized forwarding. I understand the WS-F6700-CFC card is required...
I have heard reports that if you performed an upgrade to 10.5, you may need to reinstall the latest VPN client for it to work. It needs to reinstall some files that the upgrades process may have removed.I performed a clean install of 10.5 and have b...
I can't verify this for sure, but I seem to recall that doing the commands in that order would not work. Basically the "passive-interface default" would remove any of your "no passive-interface " statements.I'd have to try it in the lab to be 100% c...
I may have figured it out, but am not sure."show ip eigrp top" simply listsP 10.214.210.0/24, 1 successors, FD is 25856 via 10.214.206.3, GigabitEthernet9/33Is it the case that show ip eigrp top x.x.x.x/y shows all items learned, even those wh...
