Hi I'm configuring a CISCO881W as an AP only. User get connected to the WIFI but they can't go to Internet. I can ping google IP from the AP module but I can not ping user's IP under the AP.
Can any one help me with this issue?
Thanks in advance!
I have a CISCO 881 IOSv 12.4 and I need to configure vpdn server.
Can anyone giveme some clue of where can I find this configuration? in my research in internet all that I found is for others cico models, and the one I founded for the 881, didn't wor...
Hello I'm trying to configure port-fast in an etherchannel conected to a ESX server running multiples vlans.
/-------------------/
/Stack 2960X / =======etherchannel==== /HOST ESX/
/-------------------/
but when I type:
!interface boundled into eth...
Hello,
how can I create multiples vlan with one command?
I have to create a group of VLANs 1600-2700, and i dont want to tap every vlan command, is it a easiest way to do it? Its a 2960x switch version 15.2(3E)
Thanks!!
Yes, is exactly like that.
But the problem now, is that I did an upgrade and all that I get is a prompt ap:
I don't have firmware into the flash, it doesn't let me copy anything into the flash... so I don't know if there's other way to get him to liv...
I did that also, and it doesn't work.
I had tried with no gateway, with gateway only in the router module, with AP pointing to router module and router module pointing to the gateway 36.36...
I don't know what else to do.
The 881 is connected to another router who is the gateway and the device for get internet access. Actually, I want to use the 881 as AP only, but it seems that it must use the router module also..
No, I don't have NAT since everything is in the same VLAN with the same IP range.
I set the default gateway as 192.168.36.36 for the AP and for the router module.
The users under wifi gets their address from a DHCP server in the network, and they re...
192.168.36.36 is the default gateway for VLAN 1. The router module isn't the default gateway.
When I started to configure, I had 254 as a default gateway for the IP traffic but I had the same issue, still not Internet access.
