07-31-2017 07:58 AM - edited 03-08-2019 11:33 AM
Hi I'm configuring a CISCO881W as an AP only. User get connected to the WIFI but they can't go to Internet. I can ping google IP from the AP module but I can not ping user's IP under the AP.
Can any one help me with this issue?
Thanks in advance!
08-03-2017 07:25 AM
I did that also, and it doesn't work.
I had tried with no gateway, with gateway only in the router module, with AP pointing to router module and router module pointing to the gateway 36.36...
I don't know what else to do.
08-03-2017 09:11 AM
Hello
So you disabled ip routing on the GERO_MAC router and it still was failing?
Can you post a diagran of how this is setup
My understanding is something like this:
Subnet 192.16.36.x/24
.x Dhcp Client <--AP> .253
|
GERO_MAC-RTR .254 | Router .36 <---------> Wan
res
Paul
08-04-2017 05:30 AM
Yes, is exactly like that.
But the problem now, is that I did an upgrade and all that I get is a prompt ap:
I don't have firmware into the flash, it doesn't let me copy anything into the flash... so I don't know if there's other way to get him to live again...
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: