Hello,
We have just moved an office to a new location and we have limited network ports. We currently run 2 VLANs in the office 240 for Data and 245 for Voice. I have one room with 8 users and only 2 network ports but I need to get 8 connections fo...
Hello,
We are running Call Manager on UCSC-C220-M3 servers and I am wondering if the vulnerability affects the CIMC Firmware on these boxes?
Any info would be great.
Cheers,
Glenn
Hello,
We have SX20 conference units in each of our 3 main offices. We have just started to use Desktop sharing over internal Video conferences and this works well when using a Windows PC. However, when we do this with a MAC Book the desktop when s...
Hello,
I have a branch office with 58 x 8851 Cisco Phones (SIP) connected. Voice Gateway is a Cisco 2911 Router. Phones are plugged into a Cisco 3850 switchcore.
Branch and Main office are connected via a VPN between 2 x Fortinet Firewalls.
If ...
Hello,
We are currently running 2 CUCM 10.5.1 clusters, does anyone know:-
1) When end of life support will be for this product
2) What will be the next version to install is it 12? and when will it be released
Thanks,
Glenn
Jace, Our issue was down to the fact that we didn't have enough SRST licences on our router in the office. We were running a Cisco 2911 and it only had 50 licenses, however, we had 80 phones. We are now about to go to CUCM 12.5 and we are also puttin...
Juan,
I have played around with DNS without any success. Have you made any head way?
Recently I tried looking into switching the ALG off on the Fortinet but this made no difference. To rule out the Fortinet firewalls causing the issue I put an 88...
Carlos,
No still no joy with this. Have put it down to the fact that we are using a 2911 router and it only supports 50 SRST licenses and I have 80 phones in the office. I have run debugs and had Fortinet Support investigate but they cannot see any...