Hi,I have just bought two Cisco 3750 and stacked them. When in global config mode, The IP Routing Command does not exisit. Help appreciated ASAP.See Version below Cisco IOS Software, C3750E Software (C3750E-UNIVERSALK9-M), Version 12.2(55)...
I have a design in mind which would implement a layer 3 switch with 3 VLANs, all vlan would point at the switch as the default gateway and then the switch would route all traffic to a ASA Firewall. My question relates to how would I create a static N...
I have a design which involves using a Layer 3 switch to control the internal routing. (Layer 3 Intervlan routing, See attached Document - Requires Microsoft Visio). My question is - how would I tell the ASA Firewall to NAT to an internal vlan that i...
Hi , Any help would be appreciated. I am unable to ping external address, which are directly nating through to internal hosts (Internal hosts are pingable)I have ICMP FIXUP enabled. See running config below. ASA Version 8.2(5)26 <context>!host...
Hi Reza,Okay so that is the normal NAT that allows internal traffic to gain access to the internet. But what about configuring PAT? Would the commands be the same. For example if I had 4 Vlans an Internal layer 3 switch192.168.0.1/24 - Servers192....
