Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I am getting the symptoms as listed in the Bug ID. Note FW1IPS and FW2IPS are a failover pair, where as DRFWIPS is on its own. All functionality appears to be working correctly but cannot get the CPU to drop.Thanks
I have a number of 7940 and 7960 phones and they are failing to pick up the alternative ringtones that are available on the tftp server. I have checked the Ringlist.xml and the DistinctiveRingList.xml file and they are both pointing to the correct ....
Is this possible in CCM itself? A bunch of us can't think of an elegant way to do it - if at all.We have a customer with an outsourced contact centre. If the Contact Centre forwards the call to an extension within the customer organisation, the custo...
Hi.One of our clients has the following scenario...ASA 5510 FW v7.2 at head office800 series routers at remote offices.All remote sites of establish a Site to Site IPSec vpn to head office ASA.They want to increase the speed over the VPN's so they ha...
I have a problem with just one VPN Client user.This user is on a Satellite link and has a direct connection to the internet with a Public IP Address. Up until yesterday the link VPN connection was working ok. But in the afternoon it failed, and we ca...
Thanks for that, I didn't read your response correctly. I'm still stuck as to why the phones are not able to see the additional ringtones that are available. From what I have been able to find, during the tftp process there is an address setup that...
I've logged into the OS via the command line and the files are just not there, as part of the boot process they should be created and they just are not. Is there write permissions in the tftp that the phones need? From memory we should be able to s...
You know what, I have exactly the same problem. A brand new ESX 5.0.0 build on a C200 (VMvisor), it was working fine when I had it at the office building for a customer on our lab switches. But on the customer site, patched into a cat 6500, it has c...
Yep. Just found that myself and was coming back here to report it.It has been suggested I downgrade to 15.2(2)T.And this after I had already backed out from 15.2(3)T because of the CME 8.8 issue.What's going on Cisco?Lukeyson