Hello, imagine there are hundreds of NCS and ASR9K devices. I need to detect if FPDs require upgrade.  Is there any MIB or other automated method that I could use to detect that FPD in the router "NEEDUPGD"? RP/0/RP0/CPU0:ios#show hw-module fpd all ...

If customer wants a design in which spanning-tree protocol could be avoided as much as possible, is it practical, feasible and possible to have pairs of N7K and N5K (servers connected to 2K) using vPC but simply not running STP at all? I know how vPC...

Imagine I have a N3K switch in a lab. The mgmt0 vrf as configured as below. The only way I have to get to the internet, is thru a proxy. for example I was given this information for the proxy server which other devices get connected to the Internet: ...

Hi, not sure but this could be a specific ASR9K required configuration to allow me to get prefixes from two neighbors downstream? I am attaching detailed information. Can you please let me know what  I am missing here? RP/0/0/CPU0:ios#sh ip bgp summ...

Hello folks, I have installed the PIEs for an upgrade via ISSU in the ASR9K.Question:I examine the content below from 'show install log' but I don't see the "ID" info. Please let me know where I can get the ID info?#install activate id <> issu parall...