Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Dear Net Pro Team members,We are running VOIP between CME in 3 different cities i.e. Riyadh ,Jeddah and Dammam.We are using an ISP MPLS CLoud to reach each location. We are using Wireless Point to Point to reach ISP MPLS cloud at each location.From l...
Dear Support team,We are using CME 3.3 along with IOS "c3845-spservicesk9-mz.124-3a.bin".The problem is that 2 FXO ports are not answering the incoming call. While others FXO are answering fine.Those 2 FXO ports are 0/2/2 0/3/2!!Please find the attac...
Dear Support team,We have configured cisco 2821 as PPTP server and we have users at remote location dial-ing VPN PPTP tunnel over VSAT connect. The latency is between 1 to 2 seconds as it is usual in VSAT links.The remote users are able to establish ...
Dear Support team,i have deployed MPE 2.0 in my network with following hardware and license :MPE-VT-2= MeetingPlace Express VT 2.0 Bundle-20V,6VI,6W Concurrent ULs 1MCS-7825-H3-RC1 HW-only MCS-7825-H3 with 2 GB RAM, Dual 160-GB SATA HD 1I have integr...
Dear support team,I am using 1861 and running "c1861-spservicesk9-mz.124-20.T.bin" IOS over it.But i am unable to receive caller ID of the out side callers on all the IP phones.Please note that Caller ID is activated on my PSTN line connected to the ...
Dear Hytham,Thanks for your response.We are not directly connected to the MPLS cloud. We reach the ISP cloud by a static route which points towards a gateway router provided by the ISP.IP MPLS cloud starts after ISP gatways router so how we can monit...
Dear Imartino,Thanks for your response..Let me give you a breif idea of our network.Actually, remote users dial-in PPTP session to a Test Cisco Router in my network. To reach the application server from this router, i have to hop two cisco routers in...
Dear Nick,hey guess what i solved problem by my self...!!and it was a very small thing!i just upgraded the IOS to "c1861-spservicesk9-mz.124-11.XW9.bin" and it solved the caller-id problem.so let's conclude that there is a caller-id bug in "c1861-sps...
Hi nick,Thanks for your response.I tried as per your suggestion but still the same problem.I have tried with different caller-id alerting rings but still it does'nt work.Also, i have tried caller-id alerting dsp-pre-allocate but still the same.The C...
Dear Mr.Rajesh,Thankyou for your response.As you told, i checked the telephone line with Caller-ID telephone set, the ID information appears after the 1st ring.I then changed the config on my Router's voice port to answer call after 2 seconds,3 secon...
