Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
difference between two commandsswitchport mode accesssw access Vlan 10 and switch port access Vlan 10. what will happen if switchport mode access command missing on the switch
Pim{ rp{ static{ address 10.126.1.1{group - ranges{239.0.0.0/24}}}}{Int Fe -0/0/0.0 mode sparse;Version2;}Try to migrate Juniper configuration to Cisco ASR but configuration not working properly
configuration card type 0 4controller e1 0/4/16framing crc4cem- group 0 unframingline code hdb3After this configuration controller still downE1 interface is upWhat will be the issue, anyone suggest ?
ASR 900 line card 4 0 and 5 0 controller is installed but interface serial is not showing in asr router . Instead of this showing SERIAL-acr and serial-pg
router version ios xe 17.03.04 I have a900-ima48d-c card on asr routercard type e1 0 3controller e1 0/3/17int cem 0/3/17ip commond showing error ip configuration not allowed on cem interfaceand interface serial command not showing on router
