About flettster

flettster · 06-16-2009

Good Afternoon,We are trying to log CLI commands to Cisco ACS version 3.1 from Nortel Passport 8600's. The version of code running on passports does not support tacacs+.The Passports authenticate okay but do not log any command information. I "think"...

flettster · 05-21-2019

Hi, It looks like you just might need to pop the S-Tag on the relevant ASR1 service instances using:rewrite ingress tag pop 1 symmetric That should leave the C-Tag in place on the VFI. Do you have the config to show? Cheers.

flettster · 05-20-2019

Hi Nick, I found the below in this doc:https://www.cisco.com/c/en/us/support/docs/switches/catalyst-3850-series-switches/201070-Troubleshooting-3650-3850-reloads-by-sta.pdf 3. Generate System Reports Manually Manually creating system reports requires...

flettster · 10-30-2018

Hi, This is a really good White Paper explaining the ASR 9K licencing: https://www.cisco.com/c/dam/en/us/products/collateral/routers/asr-9000-series-aggregation-services-routers/asr9000-swe-user-whitepaper.pdf Cheers, Flett

flettster · 01-02-2018

Hi Ronit, Are you missing the neighbor for SW1.R3.S04 on SW2.R1.S01 under the vfi for bridge-domain 150? l2 vfi WAC_TAP_mgmt manual vpn id 150 bridge-domain 150 neighbor 1.1.1.1 encapsulation mpls neighbor 1.1.2.1 encapsulation mpls neighbor 1.1...

flettster · 04-25-2015

Hi Muhannad,Sounds like it. Looks like you can do:show platform hardware throughput levelThis reads like 20G is the limit as well.http://www.cisco.com/c/en/us/td/docs/routers/asr1000/install/guide/1001-x/asr1hig/asr1lic.html#pgfId-1060881

Member Since	‎12-16-2008 01:51 AM
Date Last Visited	‎09-21-2023 02:17 AM
Posts	8

User Statistics

User Activity

Cisco ACS 3.1 and Logging CLI commands from Nortel Passport

Re: EVC adds and removes QinQ outer tag

Re: Catalyst 3850 Denali, How to generate system report?

Re: ASR9006. chassis-locked license

Re: Unable to ping across VPLS Vlan

Hi Muhannad,Sounds like it.