About rsardinha

rsardinha · 03-06-2020

We have a damaged card on Catalyst 6006 chasis (show faulty with red led), we find cards from several Providers but I have doubts about compatiblity, is there any advice about firmware, any thing else to look up before buy?

rsardinha · 02-12-2020

I mount this scenario before going to production.The host A is connected to int G 0/0 of Router 1945 but cant ping to internet, from router can ping 8.8.8.8, ping host A, ping ISP modem connected to int G 0/1, so need some help to understand whats wr...

rsardinha · 09-18-2009

We are in a buying process of catalyst 4500 to replace the 6006 (endofsupport). We are a broadcast tv station with 400 users unified in the same building accross 4 flors with 35xx switchs linked with fiber (GBIC), step by step we are introducing vide...

rsardinha · 09-18-2009

We are in a buying process of catalyst 4500 to replace the 6006 (endofsupport). We are a broadcast tv station with 400 users unified in the same building accross 4 flors with 35xx switchs linked with fiber (GBIC), step by step we are introducing vide...

rsardinha · 03-09-2020

Hi, Sorry for misstake, Console> (enable) sh modMod Slot Ports Module-Type Model Sub Status--- ---- ----- ------------------------- ------------------- --- --------1 1 2 1000BaseX Supervisor WS-X6K-SUP1A-2GE yes ok2 2 8 1000BaseX Ethernet WS-X6408A-G...

rsardinha · 02-17-2020

Hi Francesco, Works great. Thanks a lot.But try to understand deeper, why previous configuration dont work (without use ACL):!interface GigabitEthernet0/0description CONEXION DIGITELip address 192.168.61.6 255.255.255.252ip nat insideip virtual-reass...

rsardinha · 02-13-2020

Thanks a lot Francesco, I'll do after work hours.To understand your lines:"ip access-list extended NAT"I thought that I could use NAT without access list because previous configuration dont has and think that if i dont limit any I could use ip nat i...

rsardinha · 09-18-2009

I've been waiting for an answer like yours (independent from my vendor), thanks for all, I have more arguments to Financial Dpt.Thanks for all,Ricardo

rsardinha · 09-18-2009

Eddison,To clear my ignorence, When you talk about layer3 routing protocols I think this is usable only when exist a wan (remote offices)? Or this feature is useful for local lan?Thanks,Ricardo

Member Since	‎09-17-2009 11:36 AM
Date Last Visited	‎03-13-2020 02:22 AM
Posts	11

User Statistics

User Activity

can i replace a faulty WS-X4548-GB-RJ45 ethernet card of Catalyst 6006 with any refurbished?

can ping internet from Router1945K but can not ping from host connected to G0/0

Which Supervisor, II Plus or IV?

supervisor engine II plus or engine IV

Re: can i replace a faulty WS-X4548-GB-RJ45 ethernet card of Catalyst 6006 with any refurbished?

Re: can ping internet from Router1945K but can not ping from host connected to G0/0

Re: can ping internet from Router1945K but can not ping from host connected to G0/0

Re: supervisor engine II plus or engine IV

Re: supervisor engine II plus or engine IV