Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi guys,
I've got a tricky one I'm trying to work out. I have 2x Cisco 2851's to provide redundancy to clients - I've configured VRRP for the LAN side as follows for both routers:
r1:
interface GigabitEthernet0/0.1
description Gi0/0.1 Office GW...
Hi all,
I've got a strange one that I can't seem to work out. I've just recently moved to fiber and have stacked 3x Cisco 3750's (WS-C3750E-24TD-S) with 2x X2-10GB-SR in each 3750 to give 6 modules in total. I'm using OM3 multimode cables (3 metre...
Hi all,I've got a strange one that I'm pulling my hair out trying to work out. We've got a Cisco 7301 connected to a 3750 that's showing a lot of buffer underruns when transmitting to the 3750. The 7301's config is as follows:interface GigabitEthern...
Hi all,I've been wrecking my brains all evening trying to sort this one out and I'm convinced it's an IOS bug. I have another Cisco 877 with telnet working absolutely perfect from telnet via LAN (vrf) and WAN. It's running c870-advsecurityk9-mz.124...
Hi Calin,
No worries mate, yeah I thought this was the case. I ended up just using VRRP for the WAN ip for the exchange server's default gateway and left the single IP on each router that's part of the /29
Cheers, Mike
Hi Calin,
both connections are through the same ISP with 2 different usernames. Radius is passing the subnet route through on both connections. There is a Cisco 3750 switch on the WAN side which takes the incoming connection from the NTD which I ...
Thanks Leo,
I updated to the latest IOS - all connections are showing good so far except for one of them which is showing the same -40 thresholds again:
3750-10gig#sh int transceiverIf device is externally calibrated, only calibrated values are pri...
