About MatthewW98

MatthewW98 · 12-24-2024

Is there a way to see how long a learning path is available to access for free in Cisco U? I am in progress with the "Understanding Cisco Network Automation Essentials" and would like to complete it to get the learning credits, but also want to spend...

MatthewW98 · 10-22-2024

I am looking for some ideas for the best way to tunnel layer 2 traffic. It would need to be very inexpensive and easy to setup/manage.Background:I work in a hospital where the network used to be completely layer 2 with about 130 VLANs. A couple of ye...

MatthewW98 · 05-09-2024

So something weird was happening when we were setting up a VPN connection yesterday (tunnel is up now and passing traffic). Here is a diagram of our topology:(10.26.0.0/16)--ASA-1-------------ASA-2--(192.168.1.0)So our tunnel didn't come up right awa...

MatthewW98 · 10-23-2024

I agree with you on this as the best option as it doesn't require a re-design of a lot of things. Thanks for the input!

MatthewW98 · 10-23-2024

" The "simplest" way to span VLANs across wiring closets? Bridge those VLANs at L2 from the closet access switches all the way across the Nexus switches. That is, do not terminate those VLANs into L3 on the access switches before transporting across ...

MatthewW98 · 10-23-2024

Here is the topology:We have roughly 20 closets connecting to the Nexus switches in this fasion, and they would all need to transport each VLAN. I said we have 130 VLANs, but I think only about 20 are actually used.

MatthewW98 · 10-22-2024

That's what I was originally thinking, but I think I confused myself with how it would be setup, specifically what to use as tunnel IP. If the Nexus were to receive say an ARP message, how would it know which tunnels to broadcast it to?

MatthewW98 · 10-10-2024

Actually, I believe the question is correct. Int fa0/1 has 2 sub interfaces and those both need to be configured with nat inside, not just fa0/1. So, there is technically 3 ports (that are the inside network), but there is 4 interfaces because of the...

Member Since	‎03-15-2024 07:57 AM
Date Last Visited	‎01-01-2025 07:38 PM
Posts	21
Total Helpful Votes Received	7

User Statistics

User Activity

Cisco U free learning paths

Simplest way for tunneling layer 2 traffic?

Can ping ASA inside interface but not inside network

Re: Simplest way for tunneling layer 2 traffic?

Re: Simplest way for tunneling layer 2 traffic?

Re: Simplest way for tunneling layer 2 traffic?

Re: Simplest way for tunneling layer 2 traffic?

Re: NAT Inside command CCNA practice question