Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I've recently updated three UCS C220 M4S servers using the Cisco Host Upgrade Utility to get all three hosts to firmware package version 4.1(2g). [Note: these are standalone servers NOT managed via a fabric interconnect] Updates all have gone through...
Can anyone enlighten me on the port names used for the C2960C-12PC-L.It's got 12 x 10/100 ports and 2 x 1Gb Copper/SFP uplinks Is it eth1/1 to eth1/14 for the lotoreth1/1 to eth1/12 for the 10/100and eth2/1 to eth2/2 for the 1Gb Copper/SFPAre the Cop...
I've a W2K8 system installed and using "Storage Explorer" it can see the whole fibre channel fabric, including information on all Zones and ZoneSets - which surprised me. I thought it would at least be limited to only seeing information about the sy...
Is there anyway to syncronise the RTC on the blade to the chassis it is running in or other NTP source?The NTP settings in the UCSM only seem to keep the chassis time in sync, but the blades are entirely independent. Within the OS running on any par...
Raised this as an issue a long time ago - pleased to report I've just had an update on bug tracker that this is resolved. Says it is fixed in "Release Pending".I really hope it is fixed by now using the UCSM NTP server settings!
